EN ISO 15090:2012 F2A AN CI HI3 SRC — Dial-lacing structural fire boot with hygienic steel-wire lacing system, waterproof membrane and RFID technology. Ref. 44932 | Sizes 36–50.
| Reference | 44932 |
| Certification | EN ISO 15090:2012 — F2A AN CI HI3 SRC |
| Sizes | EU 36–50 |
| Leg height | Approx. 25 cm |
| Weight | Approx. 1,150 g per boot |
| Upper | Black full-grain waterproof leather 2.0–2.2 mm | reflective stripes on sides and rear | pronounced flex zones in heel and instep |
| Thread | Nomex — heat-resistant throughout |
| Lining | Innovative waterproof membrane — reduced water uptake between upper material layers | boots do not soak up and retain water between layers | results in less weight in wet conditions |
| Lining performance | Temperature inside shoe increases by only +5°C under thermal load |
| Toe cap | Anatomically shaped metal toe cap |
| Back counter | Preformed back counter |
| Scuff cap | Profiled and abrasion-resistant with twin recessed seams |
| Midsole | Stainless steel anti-penetration plate |
| Outsole | Injection-moulded rubber-PU | >90% PU | 6 mm self-cleaning tread | lateral profile | oil, fuel & acid resistant | SRC |
| Entry system | Dial lacing system with steel wire laces |
| Ankle protection | AN rated | anatomically shaped padding in lugs, ankle and midfoot area |
| Insole | Changeable washable (30°C) anatomically shaped memory foam insole |
| RFID | RFID technology integrated |
| Cold insulation | CI rated |
| Heat insulation sole | HI3 rated (150°C) |
Steel wire dial laces for easy cleaning of the boot — no fabric laces that trap contaminants. No pressure in the tongue area, reliable secure fit, and fast to adjust with one hand.
Innovative membrane lining prevents water from soaking into and accumulating between the upper material layers — keeping the boot lighter and reducing fatigue in wet operational environments.
Sporty profile designed for firefighters who require both high performance and a modern look — without compromising any element of the EN 15090 F2A structural firefighting certification.
Anatomically shaped padding in lugs, ankle and midfoot area — combined with an anatomically shaped metal toe cap — provides consistent protection and comfort across the full foot.
Integrated RFID for boot identification, PPE inspection records and service life tracking — ideal for large brigade fleet management.
Changeable and washable at 30°C. Anatomically shaped with memory foam for comfort during extended operational shifts.
The dial system uses steel wire laces tensioned by a rotating dial rather than fabric laces. Steel wire is non-absorbent and can be wiped clean — unlike textile laces that absorb chemicals, biological contamination and moisture. This makes the Dynex Spin particularly well-suited for HazMat, decontamination and industrial environments where hygiene matters alongside standard structural fire protection.
The Dynex Spin's innovative membrane lining is specifically designed to prevent water from penetrating and being retained between the upper material layers. Standard boots can absorb and hold water in the leather-membrane space, adding significant weight over time. The Dynex Spin's construction prevents this mass gain — keeping the boot closer to its dry weight even during prolonged exposure to water.
Yes. The Dynex Spin is certified to EN ISO 15090:2012 F2A — the structural firefighting category for interior attack — and carries full AN (ankle protection), CI (cold insulation), HI3 (sole heat insulation at 150°C) and SRC (slip resistance) ratings.
Yes. We supply mixed size runs in a single shipment. Provide the size breakdown and delivery country and we return a written quotation with lead time for Egypt, UAE, Gulf and Africa.