BM/BMM Jet/Spray Branch Pipes
AWG BM and BMM jet/spray branch pipes switch between full jet and variable spray (0–160°), with optional water curtain for heat protection and single-motion shut-off. The standard attack branch pipe for structural and industrial firefighting. EN 15182 certified.
AWG
BM Jet/Spray Branch Pipe
Standard BM branch pipe — full jet and variable spray (0–160°) with water curtain and single-motion shut-off. Available with Storz, DIN or BSP inlet coupling.
- Flow rate: 100–400 l/min
- Inlet: Storz 65, DIN or BSP G 2½"
- Pressure: 3–7 bar
- Spray angle: 0–160° variable
- Certification: EN 15182
AWG
BMM Jet/Spray Branch Pipe (High-Flow)
Large-bore BMM branch pipe for high-flow industrial and major incident attack — variable spray, water curtain, single-motion shut-off
- Flow rate: 200–800 l/min
- Inlet: Storz 75(B) or Storz 65
- Pressure: 5–10 bar
- Spray angle: 0–160° variable
- Certification: EN 15182
AWG
BM Branch Pipe with Storz 65 Coupling
BM branch pipe fitted with Storz 65 mm coupling — the most common attack configuration for European fire hose systems
- Flow rate: 100–500 l/min
- Inlet coupling: Storz 65 mm
- Pressure: 3–8 bar
- Spray angle: 0–160° variable
- Certification: EN 15182
ALCO Monitors & Deck Guns
AWG distributes the ALCO APF range of portable and vehicle-mounted monitors — from the compact APF 2 TurboFighter to large APF 6 industrial monitors. Suitable for vehicle roof, bumper, fixed installation or portable tripod use. Flow rates from 500 to 16,000+ litres per minute.
AWG / ALCO
ALCO APF Portable Monitor
Tripod-mounted portable monitor (APF 2 TurboFighter series) — rapid deployment for major incident water application; one person carry and set-up
- Flow rate: 500–2,500 l/min
- Inlet: Storz 75 mm or BSP flanged
- Elevation: continuous vertical + horizontal swivel
- Integrated ball valve shut-off
- Foldable support feet for stability
AWG / ALCO
ALCO APF Fixed / Vehicle Monitor
Roof or bumper-mounted vehicle monitor (APF 2.5–APF 6 range) for fire tenders, airport vehicles and industrial fixed installations
- Flow rate: 1,000–16,000 l/min (by model)
- Manual, electric (DC/AC) or hydraulic drive
- Ball-bearing swivel joints
- Water, foam or powder application
- Remote control option available
AWG
Foam Inductor (Inline Eductor)
Venturi-type foam inductor — 3% and 6% settings, compatible with all AWG nozzles and monitors
- Induction rate: 3% / 6% selectable
- Flow range: 200–1,000 l/min
- Inlet/outlet: Storz 65 or 75 mm
- No moving parts
- Compatible: AFFF, FFFP, CAFS foam concentrates
Branch Pipes, Valves & Fittings
AWG ball valves, dividing breeching, collecting heads, Storz couplings and hose reel fittings — available in DIN, Storz and BSP standards.
AWG
Ball Valve
Quarter-turn ball valve for hose line isolation — Storz or DIN coupling both ends
- Sizes: 38 mm / 52 mm / 65 mm / 75 mm
- Coupling: Storz or DIN
- Body: aluminium alloy
- Quarter-turn operation
- Working pressure: 16 bar
AWG
Dividing Breeching (Wye)
1-inlet / 2-outlet dividing breeching for splitting a single supply line into two attack lines
- Inlet: Storz 65 or 75 mm
- Outlets: 2× Storz 52 or 65 mm
- Separate gate valve per outlet
- Body: aluminium alloy
- Max. pressure: 16 bar
AWG
Collecting Head (Siamese)
2-inlet / 1-outlet collecting head for combining two supply lines into a single large outlet
- Inlets: 2× Storz 65 or 75 mm
- Outlet: Storz 75 or 110 mm
- Non-return valves per inlet
- Body: aluminium alloy
- Max. pressure: 16 bar